Moog Ball Joints are considered one of the most important components of your car suspension system. The ball joints serves mainly as the pivot point between the suspension and tires. This often consists of a bearing stud, hardened steel, and socket which is enclosed in a steel housing. This is located on the vehicle's front end so it can support weight. In some Acura TL's, there are two ball joints per wheel, the upper ball joint and the lower ball joint. Regular check and maintenance should be done to these ball joints, together with the rest of the steering and suspension system subcomponents. Along with a complete wheel alignment, ball joints should be inspected at least once a year and should be lubricated at every oil change.

         If you fail to do this, chances are your ball joints will wear out without you noticing it. Symptoms like uneven tire wear, erratic steering, and wandering will become apparent, thus you have to take immediate action in replacing the ball joints to prevent further steering and suspension system problems. These Bearings Include Grease Grooves that ensure flow of lubrication throughout the ball joint.This high quality and direct fit OE replacement ball joints features a housing forged from fine grain alloy steel for unequaled strength and durability, powdered metal gusher bearings that resist wear better than conventional designs, and pressed in cover plates to provide a solid steering feel. Moog uses premium polychloroprene and polyurethane  superior compounds that stand up to temperature extremes, dirt and abrasion to seal the boots on there ball joints. In addition, the ball joints boots are fitted with grease relief valves. These features help prevent contamination and allow debris to be flushed out when the ball joint is serviced.

• ·      ·      A Housing Forged From Fine Grain Alloy Steel For Unequaled Strength And Durability.
• ·      ·      Boasts Powdered Metal Gusher Bearings That Resist Wear Better Than Conventional Designs.
• ·      ·      Regular check and maintenance should be done to these ball joints.
• ·      ·      Has Pressed In Cover Plates To Provide a water seal.
• ·      ·      Solid Steering Feel, Allows Contamination Prevention .