Acura TL Intrax Sport Progressive Lowering springs
Acura TL Intrax Sport Progressive Lowering springs
From: $255.00
 

 Acura TL Sport Progressive Springs

Installing Intrax Progressive Sport Lowering Springs on your Acura TL can provide a substantial improvement in handling and appearance.The center of gravity of your Acura TL will be lower, which will allow the four tires to stay more evenly planted to the ground. Installing a set of lowering springs on a car is more involved than just installing shorter springs. It is usually necessary to readjust the camber on the front and possible the rear suspension ,since it will change when the car is lowered. Generally, you should  have a full alignment after installing a set of Sport lowering springs. Although lowering a car will usually improve handling, lowering it too much will not allow for enough suspension travel, or stroke. The lowering springs on your Acura TL may bottom out on the suspension (suspension reaches full travel) or the chassis may actually hit the ground, leading to loss of traction and possible damage to the underside of your Acura TL.

    The progressive sport lowering springs provide high performance looks and a comfortable quality ride. Intrax creates the finest lowering springs, from start to finish. Intrax's lowering springs begin the forming process with cold winding to the most exacting standards. Within two hours of forming, springs are stress relieved in an oven (not to be confused with heat treating), and then shot peened to remove surface imperfections and further relieve internal stress. This can extend service life of a spring up to 200 percent or more. Next, the lowering spring is blocked (wound to a longer length than required, and set in a hydraulic press to obtain designed free length). This eliminates the settling other brands require, due to the lower cost of their production processes. Finally, the lowering springs are Phosphate coated for corrosion resistance, and electro-statically powder coated to ensure a lifetime of outstanding looks.

  • Provide high performance looks.
  • Phosphate coated for corrosion resistance.
  • Lowers the center of gravity.
  • Gives a substantial improvement in handling and appearance.
  • Gives a comfortable ride quality.
  • Shot peened to remove surface imperfections .