After the installation of either an Acura TL Eibach Pro Kit or a Acura TL Sport line Lowering spring kit, a vehicles alignment should always be checked. Once lowered, your Acura TL's wheels camber may become increasingly negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in peculiar handling and accelerated tire wear. Eibach offers a complete range of a Acura alignment kit which offer a simple, affordable solution to adjust negative camber. This Acura TL alignment kit not only assist in alignment your Acura's camber back to factory specifications, but it also allows the experienced chassis tuner to utilize the increased alignment range to dial-in a performance alignment,that uses negative camber to maximize a chassis potential. Alignment becomes more precise and handling increasingly crisp and predictable. High speed stability is also enhanced making an alignment kit from Eibach almost a necessity for the serious performance tuner. The Pro alignment kit is Manufactured by Specialty Products Company .

When the top of the tire is more towards the center of your Acura TL and the bottom is outwards, that is measured in negative camber. Negative camber wears the inside of your tires at a rapid rate. Lowering your Acura TL brings the entire chassis closer to the tires changing the alignment. Everything is moving downwards except the tires. Obviously they cannot go down any more because they are on the ground. Since suspension is put together with the factory ride height in mind, parts are made to be installed and have near 0 degree camber. By lowering the suspension components but not the wheel, the wheel in essence lowers itself by tilting inwards.  A alignment kit corrects this problem by extending the length of the upper control arm, allowing the ball joint which holds the control arm in place to be adjusted. It can be moved out for negative camber correction or in for positive correction. This along with an alignment kit is the ultimate defense against camber wear. A Acura TL Pro alignment kit allows for positive 4 degrees to negative 2 degrees of rear camber alignment. This alignment kit can return camber back to factory specifications for everyday driving, but it can also be used by experienced chassis tuners to dial-in a more performance oriented alignment, making alignment more precise .Recommended especially for Acura's with a  Sport line kit or a Acura TL Pro-Street  kit, With a limited two-year warranty.

• Pro alignment kit allows for positive 4 degrees to negative 2 degrees of rear camber alignment.
• An alignment kit is the ultimate defense against camber wear.
• A negative camber Kit aids in improving traction .