The Acura TL Neuspeed anti-Sway bars are an essential component for your AcuraTl. Your Anti-Sway bars should be chosen to match your springs. If you are planning on installing stiff springs, there is no need for a large diameter sway bar. The combination of stiff springs and small anti-sway bars is enough to control body roll. Large diameter anti-sway bars are necessary if you will be using relatively soft springs. This is a popular configuration since the ride is not overly harsh, but the suspension is still stiff and body roll is reduced due to the Anti-sway bars. Soft springs with large anti-sway bars and stiff springs with small anti-sway bars accomplish virtually the same goal of providing a stable suspension and reducing excessive weight transfer.
A stiff springs/small anti-sway bars setup is generally better than a soft springs/large anti-sway bars because stiff springs reduce front to back weight transfer. With soft springs, side to side weight transfer is controlled by the Anti-sway bars, but there is a fair amount of front to back weight transfer due to the soft springs. In other words, using soft springs can result in brake dive and acceleration squat, which are detrimental to overall handling. If your goal is to squeeze the highest level of performance out of your Acura TL, anti-sway bars are race engineered to work in perfect harmony with all other suspension components, stock or aftermarket.
With NEUSPEED, you get the ultimate in handling, safety and appearance. Anti-sway bars are mandrel bent (which eliminates the gouges at the bends) using only aerospace quality 6150 steel that does not require heat treating a process which can distort the bar and leave a rough finish. The ends are machined (in most applications where possible) to use precision ball-joints for precise control and alignment. Polyurethane bushings and custom formed brackets utilizing grade eight or better hardware make mounting very easy. Both front and rear anti-sway bars feature a highly engineered bolt on system of light weight design that directly relates to improved performance. After being thoroughly inspected by Neuspeed in-house QA people, a liquid-look, gloss black powder coat finish is applied. These are the same anti-sway bars used by winning drivers in SCCA, NASA, IMSA and SOLO racing. When you purchase a anti-sway bars, you are guaranteed long lasting performance, quality and a limited lifetime warranty that you will never need to use. Clear, illustrated instructions are furnished with all anti-sway kits.
Inspection
Buyer shall inspect and reconcile all inbound shipments from tlsuspension.com within seven (7) working days. Claims for shortages or damaged merchandise must be submitted to tlsuspension.com no more than ten (10) working days following Buyer's receipt of shipment.
Returns; Defective and Damaged Merchandise
Defective and freight damaged merchandise (but only where tlsuspension.com is providing shipment) may be returned to tlsuspension.com for full credit, but only upon verification by tlsuspension.com of such defect or damage. A Returned Merchandise Authorization ("RMA") form must be filled out by the Buyer and Approved by tlsuspension.com . Credit will be issued to Buyer upon receipt of the RMA form and the claim approval from the freight company.
Returns; Exchanges; Good Merchandise
Returns of good merchandise may be accepted by tlsuspension.com in its sole discretion under the following conditions:
Return/Exchange of merchandise in totally re-saleable condition, without markings on the original packaging will be restricted to extraordinary circumstances with prior approval from tlsuspension.com. Accepted return will be assessed a 25% restocking charge. Returned part number shall not exceed 15% of total annual purchase quantities.
Return/Exchange of merchandise in packaging that has been marked, relabeled or otherwise defaced will be restricted to extraordinary circumstances with prior approval from your tlsuspension.com. Accepted return will be assessed a 30% restocking charge, except that tlsuspension.com merchandise returned in packaging that has been marked, relabeled or otherwise defaced will be subject to a 40% restocking charge. Returned part number shall not exceed 15% of total annual purchase quantities.
Merchandise classified by tlsuspension.com as TB (To Be Discontinued), or DC (Discontinued), may not be returned for credit.
Merchandise on sales promotion or inventory packages may not be returned for credit.
Buyer must pay all return transportation charges.
Buyer must obtain and complete an RMA form, issued by tlsuspension.com for any good merchandise return or exchanges.
Returns/Exchanges will not be accepted under any circumstances after 15 calendar days after the ship date indicated by tlsuspension.com.
Any returns for non-fitment or quality issues will require high quality digital pictures of the products to be emailed to the account manager before an RMA is approved.
Order cancellations will take up to 48 hours after a cancellation is requested before the order is officially cancelled and money processed for return.