When you install Acura TL Sprint Performance lowering springs, you are reducing the center of gravity therefore creating less resistance on the chassis through the turns. This will result in quicker steering response and crisper road feel. The look of Acura TL Performance lowering springs on your Acura is also unmatched. Closing that wheel gap that is present makes the entire look of the vehicle more aggressive. Be sure when choosing a ride height you measure all wheel clearances.
The drop will be the amount from the bottom on the fender lip to the top of the tire Make sure you have room. You may also want to look into the lowering springs spring rates. Different lowering springs have different rates, which will affect the handling of the vehicle and the overall ride quality. Higher spring rates will yield a tighter suspension but a stiffer ride. Softer springs will still increase performance but will maintain a decent ride quality. Choosing the proper lowering springs takes a bit a time and research. Doing it right the first time will save you a headache in the long run. Remember when lowering your AcuraTL ,it is generally recommended to add a camber correction kit. This will keep your alignment in spec and tread of your tires.
Since 1995, Sprint Performance Suspension has designed, engineered, inspected, and tested its lowering springs products in its own extensive facilities. By doing everything in-house, you can rest assured that you are getting lowering springs of the highest quality workmanship,not to mention the accuracy of fitment and handling optimization for each specific street car. Made with the enthusiast in mind, Acura TL Performance lowering springs are designed to properly and safely lower your Acura's center of gravity through the use of proprietary progressive spring rates; reducing squat during acceleration, body roll in the turns, and nose dive under braking. All lowering springs are shot-peened, heat treated, pre-set, inspected, tested, and performance powder-coated to insure a lifetime of durability. Lowerings springs are manufactured in the USA using the finest chrome silicon steel on computerized CNC coil machines, MFG stands behind its line of ISO 9001 certified lowering springs.With a limited lifetime warranty, Acura TL Performance Suspension lowering springs truly has the engineering and designing expertise that speaks for itself.
Inspection
Buyer shall inspect and reconcile all inbound shipments from tlsuspension.com within seven (7) working days. Claims for shortages or damaged merchandise must be submitted to tlsuspension.com no more than ten (10) working days following Buyer's receipt of shipment.
Returns; Defective and Damaged Merchandise
Defective and freight damaged merchandise (but only where tlsuspension.com is providing shipment) may be returned to tlsuspension.com for full credit, but only upon verification by tlsuspension.com of such defect or damage. A Returned Merchandise Authorization ("RMA") form must be filled out by the Buyer and Approved by tlsuspension.com . Credit will be issued to Buyer upon receipt of the RMA form and the claim approval from the freight company.
Returns; Exchanges; Good Merchandise
Returns of good merchandise may be accepted by tlsuspension.com in its sole discretion under the following conditions:
Return/Exchange of merchandise in totally re-saleable condition, without markings on the original packaging will be restricted to extraordinary circumstances with prior approval from tlsuspension.com. Accepted return will be assessed a 25% restocking charge. Returned part number shall not exceed 15% of total annual purchase quantities.
Return/Exchange of merchandise in packaging that has been marked, relabeled or otherwise defaced will be restricted to extraordinary circumstances with prior approval from your tlsuspension.com. Accepted return will be assessed a 30% restocking charge, except that tlsuspension.com merchandise returned in packaging that has been marked, relabeled or otherwise defaced will be subject to a 40% restocking charge. Returned part number shall not exceed 15% of total annual purchase quantities.
Merchandise classified by tlsuspension.com as TB (To Be Discontinued), or DC (Discontinued), may not be returned for credit.
Merchandise on sales promotion or inventory packages may not be returned for credit.
Buyer must pay all return transportation charges.
Buyer must obtain and complete an RMA form, issued by tlsuspension.com for any good merchandise return or exchanges.
Returns/Exchanges will not be accepted under any circumstances after 15 calendar days after the ship date indicated by tlsuspension.com.
Any returns for non-fitment or quality issues will require high quality digital pictures of the products to be emailed to the account manager before an RMA is approved.
Order cancellations will take up to 48 hours after a cancellation is requested before the order is officially cancelled and money processed for return.